Collection: All Top Kits

GRD078 – Aventus F1 Kit 4.7mmThe Aventus F1 Kit is our purpose designed F1 top kit option. Shorter in length than the other models in the Aventus range makes this perfectly suited to this style of fishing. Shorter kits have several benefits for F1/commercial fishing. Thanks to the shorter length fish pop up much closer to the net which improves overall landing and fishing efficiency.Featuring a 4.7mm tip bore size makes this the perfect top kit for thin to medium pole fishing elastics. The Aventus F1 Kit is made up of two sections and comes ready to fish – Section 1 is the thinnest section and comes pre-bushed with a premium Internal PTFE bush, that has an internal diameter of 2.75mm, perfect for thin to medium pole elastics, up to a size 16 MAX. Section 2 features a carbon wrap 30cm up from the base of the section, this has been purposely designed to side elastic puller. During testing we found this carbon wrap placement to be the optimum positioning for elastic performance. However, if you choose to not use a side puller and prefer a traditional bung, this can also be done via the base of this second section.Most F1 style kits come as a single piece of carbon, ours however come in two pieces which makes the actual kit much stiffer than a single piece of carbon, due to the second section of the F1 kit being a higher grade of modulus carbon, thus making the Aventus Sky F1 Kit much stiffer than other models available. During testing we also found that having a two-piece F1 kit significantly improved elastic performance.The Aventus F1 Kit comes in a natural black carbon finish; however, we do have a Sky F1 Kit option which has been specifically developed to suit shallow fishing on commercials.Aventus F1 Kit – Total Weight = 30g

• Purpose designed F1 top kit option
• Shorter in length than the other models
• 2 piece carbon producing stiffer performance
• Sky colour version also available as a shallow water option
• Pre-bushed with 4.7mm PTFE bush

The Aventus F1 Section 1 fits onto the F1 number 2 section to create a top kit. The number 1 section has a tip bore diameter of 4.7mm and comes pre fitted with an internal PTFE bush.

• Pre-bushed with 4.7mm PTFE bush

The number 2 section for the Aventus F1 Section fits together with the number 1 section to create a top kit. The number 2 section has a strengthened section in the optimum position to fit a puller bush if required. This section is shorter that a standard number 2 section and has been designed to optimise speed and performance when catching F1s and small carp

• Reinforced carbon wrap for side puller fitting 

GRD079 – Aventus Sky F1 KitThe Aventus F1 Kit is our purpose designed shallow F1 top kit option. Shorter in length than the other models in the Aventus range makes this perfectly suited to this style of fishing. Shorter kits have several benefits for F1/commercial fishing. Thanks to the shorter length fish pop up much closer to the net which improves overall landing and fishing efficiency.The Sky colour has been purposely designed for shallow F1 fishing. The special grey sky paint camouflages into the sky resulting in better presentation and improved performance when fishing shallow, or in shallow water up to islands or edges.Featuring a 4.7mm tip bore size makes this the perfect top kit for thin to medium pole fishing elastics. The Aventus Sky F1 Kit is made up of two sections and comes ready to fish – Section 1 is the thinnest section and comes pre-bushed with a premium Internal PTFE bush, that has an internal diameter of 2.75mm, perfect for thin to medium pole elastics, up to a size 16 MAX. Section 2 features a carbon wrap 30cm up from the base of the section, this has been purposely designed to side elastic puller. During testing we found this carbon wrap placement to be the optimum positioning for elastic performance. However, if you choose to not use a side puller and prefer a traditional bung, this can also be done via the base of this second section.Most F1 style kits come as a single piece of carbon, ours however come in two pieces which makes the actual kit much stiffer than a single piece of carbon, due to the second section of the F1 kit being a higher grade of modulus carbon, thus making the Aventus Sky F1 Kit much stiffer than other models available. During testing we also found that having a two-piece F1 kit significantly improved elastic performance.Aventus Sky F1 Kit – Total Weight = 31g

• Purpose designed shallow F1 top kit option
• Shorter in length than the other models in the Aventus range
• Sky colour has been purposely designed for shallow F1 fishing
• Camouflages into the sky resulting in better presentation and improved performance
• Two piece carbon producing stiffer perfomance
• Pre-bushed with 4.7mm PTFE bush

The Aventus F1 Section 1 fits onto the F1 number 2 section to create a top kit. The number 1 section has a tip bore diameter of 4.7mm and comes pre fitted with an internal PTFE bush.This section is a discreet light grey colour to avoid spooking fish in shallow or clear water.

• Pre-bushed with 4.7mm PTFE bush
• Sky grey colour to disguise pole when fishing shallow 

The number 2 section for the Aventus F1 Sky Section fits together with the number 1 section to create a top kit. The number 2 section has a strengthened section in the optimum position to fit a puller bush if required. This section is shorter that a standard number 2 section and has been designed to optimise speed and performance when catching F1s and small carp.

• Reinforced carbon wrap for side puller fitting in the optimum position

GRD145 – Aventus Cupping Kit The Aventus Cupping Kit is a two-piece Cupping Kit, measuring in at 2.3mm as standard. The main benefit to the Aventus Cupping Kit is the exact same length (when Cup is applied) as the other 2.4M Aventus top kits. Meaning there is no need to cut down any part of the section, just simply apply your cup connector and you’ll have the exact same length Cupping Kit to your actual fishing kits. This significantly improves feeding accuracy and overall performance. Cupping Kits come under some serious strain and stress, that’s why we have used slightly thicker carbon on the Aventus Cupping Kit, to reduce the chances of potential breakages. The Aventus Cupping Kit has a bore size of 4.8mm, the perfect diameter to be used in conjunction with our Rapid Release Pole Cups (not included). Simply glue in the connector part of the Rapid Release Pole Cup and you’re good to go. (We recommend using a reliable product to glue in the connector, such as Araldite, or Gorilla Epoxy Glue).Sections only - Rapid Release Pole Cup available separately.Aventus Cupping Kit – total Weight = 38g 

• Two-piece Cupping Kit
• Same length (when cup is applied) as the other 2.4m Aventus kits
• No need to cut down any part of the section - simply apply cup connector
• Significantly improves feeding accuracy
• Increased strength due thicker carbon construction
• Perfect diameter for Guru Rapid Release Pole Cups (sold separately)

The Aventus cupping kit section 1 fits onto the cupping kit number 2 section to create the full cupping kit. This is the same length as the Aventus Match, Match Power and Carp Power kits to provide pinpoint accuracy. This section is designed to take the Guru Rapid Release Pots without the need for cutting back or modifying the section.

• Rapid Release Pole Cup adapter fits straight on

The Aventus Cupping Kit Section 2 fits onto the cupping kit number 1 section to create the full cupping kit. This is the same length as the Aventus Match, Match Power and Carp Power kits to provide pinpoint accuracy. 

• Re-inforced carbon for extra strength when cupping in

GRD146 - Aventus F1 Cupping Kit The Aventus F1 Cupping Kit comes as a two-piece cupping kit, measuring at 1.7M and comes supplied in the exact same length (when Cup is applied – roughly 70mm) as the other 1.8M Aventus F1 and Aventus Sky F1 top kits. Meaning there is no need to cut down any part of the section, just simply apply your cup connector and you’ll have the exact same length Cupping Kit to your actual F1 fishing kits. This significantly improves feeding accuracy and overall performance.Cupping Kits come under some serious strain and stress, that’s why we have used the same carbon material as our Aventus Power Kits, to reduce the chances of potential breakages.The Aventus Cupping Kit has a bore size of 4.8mm, the perfect diameter to be used in conjunction with our Rapid Release Pole Cups (not included). Simply glue in the connector part of the Rapid Release Pole Cup and you’re good to go. (We recommend using a reliable product to glue in the connector, such as Araldite, or Gorilla Epoxy Glue).Sections only - Rapid Release Pole Cup available separately.Aventus Cupping Kit – total Weight = 27g

• Two-piece Cupping Kit
• Same length (when cup is applied) as the other 1.8m Aventus F1 kits
• No need to cut down any part of the section - simply apply cup connector
• Significantly improves feeding accuracy
• Increased strength due thicker carbon construction
• Perfect diameter for Guru Rapid Release Pole Cups (sold separately)

The Aventus F1 cupping kit Section 1 fits onto the F1 cupping kit number 2 section to create the full cupping kit. This is the same length as the Aventus F1 kit and F1 Sky kits to provide pinpoint accuracy. This section is designed to take the Guru Rapid Release Pots without the need for cutting back or modifying the section.

• Rapid Release Pole Cups fit straight on
• Stiff, strong and reinforced for cupping in

The Aventus F1 cupping kit Section 2 fits onto the F1 cupping kit number 1 section to create the full cupping kit. This is the same length as the Aventus F1 kit and F1 Sky kits to provide pinpoint accuracy. 

• Stiff, strong and reinforced for cupping in

N-Gauge Pro Match Kit 3.5mm - Top 2 - 2.4m. These top kits are constructed from ZERO600 Tensile Carbon making them light and stiff with slimmer 3.5mm tips for thinner elastics perfect for all silver fish fishing.Combined with a Super Glide Paint finish, these top kits provide the upmost efficiency and smoothness and are an optional upgrade to the ZERO400 top kits that are supplied in the N-Gauge Pro ZERO600 Pole Packages.

• ZERO600 Tensile Carbon Construction
• Super Glide Matt Paint Finish
• Fitted with UK Manufactured PTFE Bushes

N-Gauge Pro Match Kit 3.5mm - Top 3 - 3.9m. These top kits are constructed from ZERO600 Tensile Carbon making them light and stiff with slimmer 3.5mm tips for thinner elastics perfect for all silver fish fishing.Combined with a Super Glide Paint finish, these top kits provide the upmost efficiency and smoothness and are an optional upgrade to the ZERO400 top kits that are supplied in the N-Gauge Pro ZERO600 Pole Packages.

• ZERO600 Tensile Carbon Construction
• Super Glide Matt Paint Finish
• Fitted with UK Manufactured PTFE Bushes

N-Gauge Pro Match Kit 3.5mm - Top 4 - 5.5m. These top kits are constructed from ZERO600 Tensile Carbon making them light and stiff with slimmer 3.5mm tips for thinner elastics perfect for all silver fish fishing.Combined with a Super Glide Paint finish, these top kits provide the upmost efficiency and smoothness and are an optional upgrade to the ZERO400 top kits that are supplied in the N-Gauge Pro ZERO600 Pole Packages.

• ZERO600 Tensile Carbon Construction
• Super Glide Matt Paint Finish
• Fitted with UK Manufactured PTFE Bushes

The N-GAUGE PRO Match 3.5mm Number 1 section is built using high quality Zero 600 High Tensile carbon offering the perfect balance of strength and responsiveness. The number one section features an internal bush to make the kit ready to fish and is designed to fit the number two section of the N-Gauge Pro Match 3.5mm Kit. The thinner 3.5mm bore is perfect for lighter thinner elastics associated with the 3.5mm Match Kit. N-GAUGE PRO Zero 600 Match 3.5mm #01 Weight = 14g