Collection: Aventus

GRD067 – Aventus Z900 3.5mm 2.4M Match Kit The Aventus Z900 Match Kit has been designed with a 3.5mm tip bore size which suits thinner pole elastics perfectly. The Z900 2.4M Match Kit has been developed to cover most natural pole fishing situations, but it’s also a very effective option for commercial silverfish work.The Aventus Z900 Match Kit is made up of two sections and comes ready to fish – Section 1 is the thinner of the two sections and comes pre-bushed with a premium Internal PTFE bush, that has an internal diameter of 1.95mm that is perfect for thinner elastics up to an 8 solid or 4/6 Hollow MAX. Section 2 features a carbon wrap 30cm up from the base of the section, this has been purposely designed to side elastic puller. During testing we found this carbon wrap placement to be the optimum positioning for elastic performance. However, if you choose to not use a side puller and prefer a traditional bung, this can also be done via the base of this second section.The Aventus Z900 Match Kit when fully assembled is 2.4 metres in length. Again, during countless hours of testing with different length top kits, the Guru team found this to be the perfect length for most pole fishing situations.Aventus Z900 2.4M Match Kit - Total Weight = 40g

• Perfect for thinner pole elastics
• 2.4m fully assembled
• 3.5mm bore
• Pre-bushed with PTFE bush 
• Reinforced carbon wrap on No2 section for side puller fitting

GRD068 - Aventus Z900 3.5mm 3.9M Match KitThe Aventus Z900 3.9M Match Kit is made up of a 2.4M Aventus Z900 Match Kit and an Aventus Z900 number 3 section. The Z900 2.4M Match Kit has been designed with a 3.5mm tip bore size which suits thinner pole elastics perfectly. The Z900 Match Kit has been developed to cover most natural pole fishing situations, but it’s also a very effective option for commercial silverfish work.The Aventus Z900 3.9M Match Kit is made up of three sections and comes ready to fish – Section 1 is the thinnest section and comes pre-bushed with a premium Internal PTFE bush, that has an internal diameter of 1.95mm that is perfect for thinner elastics up to an 8 solid or 4/6 Hollow MAX. Section 2 features a carbon wrap 30cm up from the base of the section, this has been purposely designed to side elastic puller. During testing we found this carbon wrap placement to be the optimum positioning for elastic performance. However, if you choose to not use a side puller and prefer a traditional bung, this can also be done via the base of this second section.The Aventus Z900 3.9M Match Kit when fully assembled is 3.9M metres in length. 2.4M Z900 Match Kit, plus a 1.5M Aventus Z900 number 3 section. Particularly effective Match Kit package to suit deep pole fishing situations.Aventus Z900 3.9M Match Kit - Total Weight = 85g

• Suits thinner pole elastics perfectly
• Three sections and comes ready to fish
• 3.9m fully assembled
• Particularly effective Match Kit package to suit deep pole fishing situations
• 3.5mm bore
• Pre-bushed with PTFE bush
• Reinforced carbon wrap on No2 section for side puller fitting

GRD069 - Aventus Z900 3.5mm 5.5M Match KitThe Aventus Z900 5.5M Match Kit is made up of a 2.4M Aventus Z900 Match Kit, an Aventus Z900 number 3 and number 4 section. The Z900 2.4M Match Kit has been designed with a 3.5mm tip bore size which suits thinner pole elastics perfectly. The Z900 Match Kit has been developed to cover most natural pole fishing situations, but it’s also a very effective option for commercial silverfish work.The Aventus Z900 5.5M Match Kit is made up of 4 sections and comes ready to fish – Section 1 is the thinnest section and comes pre-bushed with a premium Internal PTFE bush, that has an internal diameter of 1.95mm that is perfect for thinner elastics up to an 8 solid or 4/6 Hollow MAX. Section 2 features a carbon wrap 30cm up from the base of the section, this has been purposely designed to side elastic puller. During testing we found this carbon wrap placement to be the optimum positioning for elastic performance. However, if you choose to not use a side puller and prefer a traditional bung, this can also be done via the base of this second section.The Aventus Z900 5.5M Match Kit when fully assembled is 5.5M metres in length. 2.4M Z900 Match Kit, plus a 1.5M Aventus Z900 number 3 section and a 1.6M Aventus Z900 number 4 sections. Particularly effective Match Kit package to suit deep pole fishing situations.Aventus Z900 5.5M Match Kit - Total Weight = 172g

• Suits thinner pole elastics perfectly
• Four sections and comes ready to fish
• 5.5m fully assembled
• Particularly effective Match Kit package to suit deep pole fishing situations
• Pre-bushed with 3.5mm bore PTFE bush
• Reinforced carbon wrap on No2 section for side puller fitting

GRD073 - Aventus Z700 3.5mm 2.4M Match KitThe Aventus Z700 Match Kit has been designed with a 3.5mm tip bore size which suits thinner pole elastics perfectly. The Z700 2.4M Match Kit has been developed to cover most natural pole fishing situations, but it’s also a very effective option for commercial silverfish work.The Aventus Z700 Match Kit is made up of two sections and comes ready to fish – Section 1 is the thinner of the two sections and comes pre-bushed with a premium Internal PTFE bush, that has an internal diameter of 1.95mm that is perfect for thinner pole elastics, up to an 8 solid or 4/6 Hollow MAX. Section 2 features a carbon wrap 30cm up from the base of the section, this has been purposely designed to side elastic puller. During testing we found this carbon wrap placement to be the optimum positioning for elastic performance. However, if you choose to not use a side puller and prefer a traditional bung, this can also be done via the base of this second section.The Aventus Z700 Match Kit when fully assembled is 2.4 metres in length. Again, during countless hours of testing with different length top kits, the Guru team found this to be the perfect length for most pole fishing situations.Aventus Z700 2.4M Match Kit - Total Weight = 40g

• Suits thinner pole elastics perfectly
• Two sections and comes ready to fish
• 2.4m fully assembled
• Perfect length for most pole fishing situations
• Pre-bushed with 3.5mm PTFE bush
• Reinforced carbon wrap ready for side puller fitting

GRD074 - Aventus Z700 3.5mm 3.9M Match KitThe Aventus Z700 3.9M Match Kit is made up of a 2.4M Aventus Z700 Match Kit and an Aventus Z700 number 3 section. The Z700 2.4M Match Kit has been designed with a 3.5mm tip bore size which suits thinner pole elastics perfectly. The Z700 Match Kit has been developed to cover most natural pole fishing situations, but it’s also a very effective option for commercial silverfish work.The Aventus Z700 3.9M Match Kit is made up of three sections and comes ready to fish – Section 1 is the thinnest section and comes pre-bushed with a premium Internal PTFE bush, that has an internal diameter of 1.95mm that is perfect for thinner pole elastics, up to an 8 solid or 4/6 Hollow MAX. Section 2 features a carbon wrap 30cm up from the base of the section, this has been purposely designed to side elastic puller. During testing we found this carbon wrap placement to be the optimum positioning for elastic performance. However, if you choose to not use a side puller and prefer a traditional bung, this can also be done via the base of this second section.The Aventus Z700 3.9M Match Kit when fully assembled is 3.9M metres in length. 2.4M Z700 Match Kit, plus a 1.5M Aventus Z700 number 3 section. Particularly effective Match Kit package to suit deep pole fishing situations.Aventus Z700 3.9M Match Kit - Total Weight = 87g

• Suits thinner pole elastics perfectly
• Three sections and comes ready to fish
• 3.9m fully assembled
• Particularly effective Match Kit package to suit deep pole fishing situations
• Pre-bushed with 3.5mm PTFE bush

GRD075 - Aventus Z700 3.5mm 5.5M Match KitThe Aventus Z700 5.5M Match Kit is made up of a 2.4M Aventus Z700 Match Kit, an Aventus Z700 number 3 and number 4 section. The Z700 2.4M Match Kit has been designed with a 3.5mm tip bore size which suits thinner pole elastics perfectly. The Z700 Match Kit has been developed to cover most natural pole fishing situations, but it’s also a very effective option for commercial silverfish work.The Aventus Z700 5.5M Match Kit is made up of 4 sections and comes ready to fish – Section 1 is the thinnest section and comes pre-bushed with a premium Internal PTFE bush, that has an internal diameter of 1.95mm that is perfect for thinner pole elastics, up to an 8 solid or 4/6 Hollow MAX. Section 2 features a carbon wrap 30cm up from the base of the section, this has been purposely designed to side elastic puller. During testing we found this carbon wrap placement to be the optimum positioning for elastic performance. However, if you choose to not use a side puller and prefer a traditional bung, this can also be done via the base of this second section.The Aventus Z700 5.5M Match Kit when fully assembled is 5.5M metres in length. 2.4M Z700 Match Kit, plus a 1.5M Aventus Z700 number 3 section and a 1.6M Aventus Z700 number 4 sections. Particularly effective Match Kit package to suit deep pole fishing situations.Aventus Z700 5.5M Match Kit - Total Weight = 187g

• Suits thinner pole elastics perfectly
• 5.5m fully assembled
• Particularly effective Match Kit package to suit deep pole fishing situations
• Pre-bushed with 3.5mm PTFE bush

GRD081 – Aventus Short No.3 Section The Aventus Short No.3 Section has been added to the range to make the Aventus poles even stiffer and more responsive. The Aventus Short. No.3 adds a lot of rigidity to the pole’s overall performance, particularly beneficial when shallow fishing on commercials, or fishing long up to islands where a fast responsive pole is a must!The Short No.3 Section fits in between the Aventus No.2 top kit section and the No.4 Aventus section. Measuring in at a 0.69M, this short No.3 Section is a vital asset for the modern-day commercial pole angler.Aventus Short No.3 Section – Total Weight = 30g

• Creates even stiffer and more responsive pole
• Particularly useful when shallow fishing on commercials
• Creates a fast responsive pole
• 0.69m in length

GRD082 – Aventus Mini 4-5 Safe SectionThe Aventus Mini 4-5 Safe Section is a very handy addition to the Aventus poles, aimed to protect the more valuable and fragile Aventus 4 and 5 sections from potential damage and breakage.The 4-5 Safe Section is particularly beneficial when you’re fishing right on the end of the section, preventing your elbow from crushing the more fragile female end of the pole.The 4-5 Safe Section can be fitted in either the 4, or the 5 section. Simply flip the Extension around to the required section and you’re good to go.Aventus Mini 4-5 Safe Section - Length = 0.58mm Total Weight = 78g

• Designed to protect Aventus 4 and 5 sections
• Beneficial when fishing on the end of the section
• Can be fitted in either the 4, or the 5 section

GRD083 – Aventus Mini 6-7 Safe SectionThe Aventus Mini 6-7 Safe Section is a very handy addition to the Aventus poles, aimed to protect the more valuable and fragile Aventus 6 and 7 sections from potential damage and breakage.The 6-7 Safe Section is particularly beneficial when you’re fishing right on the end of the section, preventing your elbow from crushing the more fragile female end of the pole.This Extension can be fitted in either the 6, or the 7 section. Simply flip the Extension around to the required section and you’re good to go.Aventus Mini 6-7 Safe Section - Length = 0.58mm Total Weight = 93g

• Designed to protect Aventus 6 and 7 sections
• Beneficial when fishing on the end of the section
• Can be fitted in either the 6 or the 7 section

GRD085 – Aventus 11.5M True Extension The Aventus 11.5M True Extension is designed to take the Aventus poles to the exact length of 11.5M. This length is commonly applied within World Championships rules and fishing restrictions in specific European countries.Unlike a lot of short butts and extensions that other poles sometimes feature, these are made from the same high-quality carbon as the main pole with some added strength under the elbow areas. This means that the poles superior performance is maintained whereas heavier butts previously lost all the balance and performance, putting the pole under an unbalanced load.The Aventus 11.5M True Extension comes with an EVA bullet nose butt protector ready fitted for ultimate protection at the back end of the section.Aventus 11.5M True Extension – Length 1.275mm Total Weight = 225g

• Takes Aventus poles to the exact length of 11.5M
• Applies to World Championships rules and fishing restrictions
• Made from same high-quality carbon as the main pole
• Comes with an EVA bullet nose butt protector

GRD086 – Aventus 13M True ExtensionThe Aventus 13M True Extension is designed to take the Aventus poles to the exact length of 13M. This length is commonly applied within World Championships rules and fishing restrictions in specific European countries.Unlike a lot of short butts and extensions that other poles sometimes feature, these are made from the same high-quality carbon as the main pole with some added strength under the elbow areas. This means that the poles superior performance is maintained whereas heavier butts previously lost all the balance and performance, putting the pole under an unbalanced load.The Aventus 13M True Extension comes with an EVA bullet nose butt protector ready fitted for ultimate protection at the back end of the section.Aventus 13M True Extension – Length 1.155mm Total Weight = 205g

• Takes Aventus poles to the exact length of 13M
• Applies to World Championships rules and fishing restrictions
• Made from same high-quality carbon as the main pole
• Comes with an EVA bullet nose butt protector

GRD087 – Aventus 16M True ExtensionThe Aventus 16M True Extension is designed to take the Aventus poles to the exact length of 16M. This length is commonly used in modern day fishing, particularly commercial pole fishing. Usually, venues limit pole anglers to a 16M length, it can be vital that you’re fishing at the exact stated 16M, up to islands or as far out into the lakes as possible in open water venues. Most poles on the market state that their poles measure 16M, but in fact it’s a much shorter length. That’s where the 16m True Extension sets the Aventus poles apart.Unlike a lot of short butts and extensions that other poles sometimes feature, these are made from the same high-quality carbon as the main pole with some added strength under the elbow areas. This means that the poles superior performance is maintained whereas heavier butts previously lost all the balance and performance, putting the pole under an unbalanced load.The Aventus 16M True Extension comes with an EVA bullet nose butt protector ready fitted for ultimate protection at the back end of the section.Aventus 16M True Extension – Length 875mm Total Weight = 200g

• Takes Aventus poles to the exact length of 16M
• Helps to comply with modern-day fishery 16M only rules
• Made from same high-quality carbon as the main pole
• Comes with an EVA bullet nose butt protector

GRD145 – Aventus Cupping Kit The Aventus Cupping Kit is a two-piece Cupping Kit, measuring in at 2.3mm as standard. The main benefit to the Aventus Cupping Kit is the exact same length (when Cup is applied) as the other 2.4M Aventus top kits. Meaning there is no need to cut down any part of the section, just simply apply your cup connector and you’ll have the exact same length Cupping Kit to your actual fishing kits. This significantly improves feeding accuracy and overall performance. Cupping Kits come under some serious strain and stress, that’s why we have used slightly thicker carbon on the Aventus Cupping Kit, to reduce the chances of potential breakages. The Aventus Cupping Kit has a bore size of 4.8mm, the perfect diameter to be used in conjunction with our Rapid Release Pole Cups (not included). Simply glue in the connector part of the Rapid Release Pole Cup and you’re good to go. (We recommend using a reliable product to glue in the connector, such as Araldite, or Gorilla Epoxy Glue).Sections only - Rapid Release Pole Cup available separately.Aventus Cupping Kit – total Weight = 38g 

• Two-piece Cupping Kit
• Same length (when cup is applied) as the other 2.4m Aventus kits
• No need to cut down any part of the section - simply apply cup connector
• Significantly improves feeding accuracy
• Increased strength due thicker carbon construction
• Perfect diameter for Guru Rapid Release Pole Cups (sold separately)

GRD146 - Aventus F1 Cupping Kit The Aventus F1 Cupping Kit comes as a two-piece cupping kit, measuring at 1.7M and comes supplied in the exact same length (when Cup is applied – roughly 70mm) as the other 1.8M Aventus F1 and Aventus Sky F1 top kits. Meaning there is no need to cut down any part of the section, just simply apply your cup connector and you’ll have the exact same length Cupping Kit to your actual F1 fishing kits. This significantly improves feeding accuracy and overall performance.Cupping Kits come under some serious strain and stress, that’s why we have used the same carbon material as our Aventus Power Kits, to reduce the chances of potential breakages.The Aventus Cupping Kit has a bore size of 4.8mm, the perfect diameter to be used in conjunction with our Rapid Release Pole Cups (not included). Simply glue in the connector part of the Rapid Release Pole Cup and you’re good to go. (We recommend using a reliable product to glue in the connector, such as Araldite, or Gorilla Epoxy Glue).Sections only - Rapid Release Pole Cup available separately.Aventus Cupping Kit – total Weight = 27g

• Two-piece Cupping Kit
• Same length (when cup is applied) as the other 1.8m Aventus F1 kits
• No need to cut down any part of the section - simply apply cup connector
• Significantly improves feeding accuracy
• Increased strength due thicker carbon construction
• Perfect diameter for Guru Rapid Release Pole Cups (sold separately)

GRD147 – Aventus Z900 Section 01 The Aventus ZER0 900 No. 1 section is made from the highest quality Japanese super high modulus carbon for ultimate stiffness, strength, and balance. Section No. 1 has a 3.5mm Internal bore and comes pre-bushed with the highest quality PTFE internal 1.95mm bush, making the section ‘ready to fish’. Please note that all the Aventus Zero 900 sections (including No.1 section) are fully compatible with the Aventus Z700 pole and spare sections. Aventus Z900 Section No. 1 Weight = 15g

• Made from the highest quality Japanese super high modulus carbon
• Ultimate stiffness, strength, and balance
• Fully compatible with the Aventus Z700 pole and spare sections
• Pre bushed with PTFE bush

GRD148 – Aventus Z900 Section 02 The Aventus ZER0 900 No. 2 section is made from the highest quality Japanese super high modulus carbon for ultimate stiffness, strength, and balance. Section 2 features a carbon wrap 30cm up from the base of the section, this has been purposely designed to side elastic puller. During testing we found this carbon wrap placement to be the optimum positioning for elastic performance. However, if you choose to not use a side puller and prefer a traditional bung, this can also be done via the base of this second section. Please note that all the Aventus Zero 900 sections (including No.2 section) are fully compatible with the Aventus Z700 pole and spare sections. Aventus Z900 Section No. 2 Weight = 25g

• Made from the highest quality Japanese super high modulus carbon
• Ultimate stiffness, strength, and balance
• Carbon wrap purposely designed for side elastic puller
• Can be used as side puller or traditional bung
• Fully compatible with the Aventus Z700 pole and spare sections