Collection: Aventus

The Aventus F1 Section 1 fits onto the F1 number 2 section to create a top kit. The number 1 section has a tip bore diameter of 4.7mm and comes pre fitted with an internal PTFE bush.This section is a discreet light grey colour to avoid spooking fish in shallow or clear water.

• Pre-bushed with 4.7mm PTFE bush
• Sky grey colour to disguise pole when fishing shallow 

The number 2 section for the Aventus F1 Sky Section fits together with the number 1 section to create a top kit. The number 2 section has a strengthened section in the optimum position to fit a puller bush if required. This section is shorter that a standard number 2 section and has been designed to optimise speed and performance when catching F1s and small carp.

• Reinforced carbon wrap for side puller fitting in the optimum position

GRD145 – Aventus Cupping Kit The Aventus Cupping Kit is a two-piece Cupping Kit, measuring in at 2.3mm as standard. The main benefit to the Aventus Cupping Kit is the exact same length (when Cup is applied) as the other 2.4M Aventus top kits. Meaning there is no need to cut down any part of the section, just simply apply your cup connector and you’ll have the exact same length Cupping Kit to your actual fishing kits. This significantly improves feeding accuracy and overall performance. Cupping Kits come under some serious strain and stress, that’s why we have used slightly thicker carbon on the Aventus Cupping Kit, to reduce the chances of potential breakages. The Aventus Cupping Kit has a bore size of 4.8mm, the perfect diameter to be used in conjunction with our Rapid Release Pole Cups (not included). Simply glue in the connector part of the Rapid Release Pole Cup and you’re good to go. (We recommend using a reliable product to glue in the connector, such as Araldite, or Gorilla Epoxy Glue).Sections only - Rapid Release Pole Cup available separately.Aventus Cupping Kit – total Weight = 38g 

• Two-piece Cupping Kit
• Same length (when cup is applied) as the other 2.4m Aventus kits
• No need to cut down any part of the section - simply apply cup connector
• Significantly improves feeding accuracy
• Increased strength due thicker carbon construction
• Perfect diameter for Guru Rapid Release Pole Cups (sold separately)

The Aventus cupping kit section 1 fits onto the cupping kit number 2 section to create the full cupping kit. This is the same length as the Aventus Match, Match Power and Carp Power kits to provide pinpoint accuracy. This section is designed to take the Guru Rapid Release Pots without the need for cutting back or modifying the section.

• Rapid Release Pole Cup adapter fits straight on

The Aventus Cupping Kit Section 2 fits onto the cupping kit number 1 section to create the full cupping kit. This is the same length as the Aventus Match, Match Power and Carp Power kits to provide pinpoint accuracy. 

• Re-inforced carbon for extra strength when cupping in

GRD146 - Aventus F1 Cupping Kit The Aventus F1 Cupping Kit comes as a two-piece cupping kit, measuring at 1.7M and comes supplied in the exact same length (when Cup is applied – roughly 70mm) as the other 1.8M Aventus F1 and Aventus Sky F1 top kits. Meaning there is no need to cut down any part of the section, just simply apply your cup connector and you’ll have the exact same length Cupping Kit to your actual F1 fishing kits. This significantly improves feeding accuracy and overall performance.Cupping Kits come under some serious strain and stress, that’s why we have used the same carbon material as our Aventus Power Kits, to reduce the chances of potential breakages.The Aventus Cupping Kit has a bore size of 4.8mm, the perfect diameter to be used in conjunction with our Rapid Release Pole Cups (not included). Simply glue in the connector part of the Rapid Release Pole Cup and you’re good to go. (We recommend using a reliable product to glue in the connector, such as Araldite, or Gorilla Epoxy Glue).Sections only - Rapid Release Pole Cup available separately.Aventus Cupping Kit – total Weight = 27g

• Two-piece Cupping Kit
• Same length (when cup is applied) as the other 1.8m Aventus F1 kits
• No need to cut down any part of the section - simply apply cup connector
• Significantly improves feeding accuracy
• Increased strength due thicker carbon construction
• Perfect diameter for Guru Rapid Release Pole Cups (sold separately)

The Aventus F1 cupping kit Section 1 fits onto the F1 cupping kit number 2 section to create the full cupping kit. This is the same length as the Aventus F1 kit and F1 Sky kits to provide pinpoint accuracy. This section is designed to take the Guru Rapid Release Pots without the need for cutting back or modifying the section.

• Rapid Release Pole Cups fit straight on
• Stiff, strong and reinforced for cupping in

The Aventus F1 cupping kit Section 2 fits onto the F1 cupping kit number 1 section to create the full cupping kit. This is the same length as the Aventus F1 kit and F1 Sky kits to provide pinpoint accuracy. 

• Stiff, strong and reinforced for cupping in

The number 1 section for the Aventus Zero 700 pole fits onto the number 2 section to create a top kit. The number 1 section has a tip bore diameter of 3.5mm and comes pre fitted with an internal PTFE bush.This section is made from Zero 700 Tensile Carbon, this is a high modulus carbon for excellent stiffness, strength and balance. 

• Pre-bushed with 3.5mm PTFE bush

The number 2 section for the Aventus Zero 700 pole fits together with the number 1 section to create a top kit. The number 2 section has a strengthened section in the optimum position to fit a puller bush if required.This section is made from Zero 700 Tensile Carbon, this is a high modulus carbon for excellent stiffness, strength and balance. 

• Reinforced with carbon wrap ready for side puller fitting

The number 03 section for the Aventus Zero 700 pole fits in between the number 2 and 4 sections. This is the section that the top kits fit on to.This section is made from Zero 700 Tensile Carbon which is a high modulus carbon for excellent stiffness, strength, and balance. It also features the Rigid Joint System; this uses super tensile carbon joints for maximum pole rigidity and joint wear resistance. A friction free matt tape finishes the section off for smoother control when shipping the pole through the hands.Performance points are marked on the section to align the spine of the pole for maximum performance.

• ZERO 700 Tensile Carbon – High modulus carbon for maximum stiffness, strength and balance.
• Ultra Fast Taper – Fast taper mandrels for superior balance, stiffness and weight distribution.
• RJS Rigid Joint System – Super tensile carbon joints for maximum pole rigidity and joint wear resistance.
• Alignment Performance Points – Section alignment points for maximum pole performance.
• Friction Free Matt Tape Finish – Friction free matt tape finish for smoother control when shipping pole through the hands.

The number 04 section for the Aventus Zero 700 pole fits in between the number 3 and 5 sections. This section is made from Zero 700 Tensile Carbon which is a high modulus carbon for excellent stiffness, strength, and balance. It also features the Rigid Joint System; this uses super tensile carbon joints for maximum pole rigidity and joint wear resistance. A friction free matt tape finishes the section off for smoother control when shipping the pole through the hands.Performance points are marked on the section to align the spine of the pole for maximum performance.

• ZERO 700 Tensile Carbon – High modulus carbon for maximum stiffness, strength and balance.
• Ultra Fast Taper – Fast taper mandrels for superior balance, stiffness and weight distribution.
• RJS Rigid Joint System – Super tensile carbon joints for maximum pole rigidity and joint wear resistance.
• Alignment Performance Points – Section alignment points for maximum pole performance.
• Friction Free Matt Tape Finish – Friction free matt tape finish for smoother control when shipping pole through the hands.

The number 05 section for the Aventus Zero 700 pole fits in between the number 4 and 6 sections. This section is made from Zero 700 Tensile Carbon which is a high modulus carbon for excellent stiffness, strength, and balance. It also features the Rigid Joint System; this uses super tensile carbon joints for maximum pole rigidity and joint wear resistance. A friction free matt tape finishes the section off for smoother control when shipping the pole through the hands.Performance points are marked on the section to align the spine of the pole for maximum performance.

• ZERO 700 Tensile Carbon – High modulus carbon for maximum stiffness, strength and balance.
• Ultra Fast Taper – Fast taper mandrels for superior balance, stiffness and weight distribution.
• RJS Rigid Joint System – Super tensile carbon joints for maximum pole rigidity and joint wear resistance.
• Alignment Performance Points – Section alignment points for maximum pole performance.
• Friction Free Matt Tape Finish – Friction free matt tape finish for smoother control when shipping pole through the hands.

The number 06 section for the Aventus Zero 700 pole fits in between the number 5 and 7 sections. This section is made from Zero 700 Tensile Carbon which is a high modulus carbon for excellent stiffness, strength, and balance. It also features the Rigid Joint System; this uses super tensile carbon joints for maximum pole rigidity and joint wear resistance. A friction free matt tape finishes the section off for smoother control when shipping the pole through the hands.Performance points are marked on the section to align the spine of the pole for maximum performance.

• ZERO 700 Tensile Carbon – High modulus carbon for maximum stiffness, strength and balance.
• Ultra Fast Taper – Fast taper mandrels for superior balance, stiffness and weight distribution.
• RJS Rigid Joint System – Super tensile carbon joints for maximum pole rigidity and joint wear resistance.
• Alignment Performance Points – Section alignment points for maximum pole performance.
• Friction Free Matt Tape Finish – Friction free matt tape finish for smoother control when shipping pole through the hands.

The number 07 section for the Aventus Zero 700 pole fits in between the number 6 and 8 sections. This section is made from Zero 700 Tensile Carbon which is a high modulus carbon for excellent stiffness, strength, and balance. It also features the Rigid Joint System; this uses super tensile carbon joints for maximum pole rigidity and joint wear resistance. A friction free matt tape finishes the section off for smoother control when shipping the pole through the hands.Performance points are marked on the section to align the spine of the pole for maximum performance.

• ZERO 700 Tensile Carbon – High modulus carbon for maximum stiffness, strength and balance.
• Ultra Fast Taper – Fast taper mandrels for superior balance, stiffness and weight distribution.
• RJS Rigid Joint System – Super tensile carbon joints for maximum pole rigidity and joint wear resistance.
• Alignment Performance Points – Section alignment points for maximum pole performance.
• Friction Free Matt Tape Finish – Friction free matt tape finish for smoother control when shipping pole through the hands.

GRD169 – Aventus Z700 11.5M Section 07B.The Aventus Z700 11.5M Section has been added to the Aventus Z700 pole range to offer anglers fishing to 11.5M pole limits (typically European anglers) with a stronger and more durable butt section. This butt section features a similar material to the Aventus 10B 16M section, increasing the overall reliability and longevity of the section. 

• Offers stronger and more durable butt section
• Increases the overall reliability and longevity of the section