Collection: Products

The number 07 section for the Aventus Zero 700 pole fits in between the number 6 and 8 sections. This section is made from Zero 700 Tensile Carbon which is a high modulus carbon for excellent stiffness, strength, and balance. It also features the Rigid Joint System; this uses super tensile carbon joints for maximum pole rigidity and joint wear resistance. A friction free matt tape finishes the section off for smoother control when shipping the pole through the hands.Performance points are marked on the section to align the spine of the pole for maximum performance.

• ZERO 700 Tensile Carbon – High modulus carbon for maximum stiffness, strength and balance.
• Ultra Fast Taper – Fast taper mandrels for superior balance, stiffness and weight distribution.
• RJS Rigid Joint System – Super tensile carbon joints for maximum pole rigidity and joint wear resistance.
• Alignment Performance Points – Section alignment points for maximum pole performance.
• Friction Free Matt Tape Finish – Friction free matt tape finish for smoother control when shipping pole through the hands.

The 13m number 08 section for the Aventus Zero 700 pole, fits in between the number 7 and 9 sections.This section is made from Zero 700 Tensile Carbon which is a high modulus carbon for excellent stiffness, strength, and balance. It also features the Rigid Joint System; this uses super tensile carbon joints for maximum pole rigidity and joint wear resistance. A friction free matt tape finishes the section off for smoother control when shipping the pole through the hands.The Aventus white iridescent paint has been used throughout the Zero 900 and Zero 700 to significantly reduce the heat absorbed throughout the section, particularly important in warmer countries. Section alignment arrows are incorporated to maintain the poles most effective performance, along with one foot marker intervals for enhanced accuracy.

• ZERO 700 Tensile Carbon – High modulus carbon for maximum stiffness, strength and balance.
• Ultra Fast Taper – Fast taper mandrels for superior balance, stiffness and weight distribution.
• RJS Rigid Joint System – Super tensile carbon joints for maximum pole rigidity and joint wear resistance.
• Alignment Performance Points – Section alignment points for maximum pole performance.
• Super Glide Smooth Paint Finish – Super smooth matt paint finish for smoother control when shipping pole through the hands.

The 14-meter number 09 section for the Aventus Zero 700 pole, fits in between the number 8 and 10 sections. This section is made from Zero 700 Tensile Carbon which is a high modulus carbon for excellent stiffness, strength, and balance. It also features the Rigid Joint System; this uses super tensile carbon joints for maximum pole rigidity and joint wear resistance. A friction free matt tape finishes the section off for smoother control when shipping the pole through the hands.The Aventus white iridescent paint has been used throughout the Zero 900 and Zero 700 to significantly reduce the heat absorbed throughout the section, particularly important in warmer countries. Section alignment arrows are incorporated to maintain the poles most effective performance, along with one foot marker intervals for enhanced accuracy.

• ZERO 700 Tensile Carbon – High modulus carbon for maximum stiffness, strength and balance.
• Ultra Fast Taper – Fast taper mandrels for superior balance, stiffness and weight distribution.
• RJS Rigid Joint System – Super tensile carbon joints for maximum pole rigidity and joint wear resistance.
• Alignment Performance Points – Section alignment points for maximum pole performance.
• Super Glide Smooth Paint Finish – Super smooth matt paint finish for smoother control when shipping pole through the hands.

Aventus Z90 Light Tip 0.5oz.Perfect for use with the Aventus Steve Ringer rods. A super light 2.5mm fit solid carbon quivertip with a tapered guide system rated at 0.5oz, perfect for finesse or winter fishing in calm conditions when ultra-sensitive bite indication is needed. Ideal for small fish like skimmers and roach.

• Solid Carbon
• Designed for Steve Ringer Aventus Rods
• 0.5oz
• Ultra sensative 
• 2.5mm fit 
• Strategically spaced lightweight guides

Aventus Z90 Light Tip 0.75oz.Designed for use with Aventus Steve Ringer rods. A light 2.5mm fit solid carbon quivertip with a tapered guide system, rated at 0.75oz, perfect for finesse or winter fishing in calm conditions when sensitive bite indication is needed.

• Solid Carbon
• Designed for Steve Ringer Aventus Rods
• 0.75oz
• Ultra sensative 
• 2.5mm fit 
• Strategically spaced lightweight guides

Aventus Z90 Light Tip 1.5oz.Designed for use with Aventus Steve Ringer rods. A light 2.5mm fit solid carbon quivertip with a tapered guide system, rated at 1.5oz, perfect for finesse fishing when sensitive bite indication is needed, but also when there is some tow, in a river situation or when anglers are casting a further distance.

• Solid Carbon
• Designed for Steve Ringer Aventus Rods
• 1.5oz
• Ultra sensative 
• 2.5mm fit 
• Strategically spaced lightweight guides

Aventus Z90 Light Tip 1oz.A 2.5mm fit solid carbon quivertip with a tapered guide system, rated at 1oz, perfect for all-round fishing offering great bite detection and sensitivity.

• Solid Carbon
• Designed for Steve Ringer Aventus Rods
• 1oz
• Ultra sensative 
• 2.5mm fit 
• Strategically spaced lightweight guides

Aventus Z90 Light Tip 2oz.A 2.5mm fit solid carbon quivertip with a tapered guide system, rated at 2oz, perfect for all-round fishing offering great bite detection and sensitivity. A heavier offering in this tip range suited to further distances, rough conditions, or towing water.

• Solid Carbon
• Designed for Steve Ringer Aventus Rods
• 2oz
• Ultra sensative 
• 2.5mm fit 
• Strategically spaced lightweight guides

GRD157 – Aventus 13M Section 08BThe Aventus 13M 08B Section has been added to the Aventus pole range to offer anglers fishing to 13M pole limits (typically European anglers) with a stronger and more durable butt section. This butt section features a similar material to the Aventus 10B 16M section, increasing the overall reliability and longevity of the section. 

• Offers stronger and more durable butt section
• Increases the overall reliability and longevity of the section
• Super Glide paint finish 

GRD067 – Aventus Z900 3.5mm 2.4M Match Kit The Aventus Z900 Match Kit has been designed with a 3.5mm tip bore size which suits thinner pole elastics perfectly. The Z900 2.4M Match Kit has been developed to cover most natural pole fishing situations, but it’s also a very effective option for commercial silverfish work.The Aventus Z900 Match Kit is made up of two sections and comes ready to fish – Section 1 is the thinner of the two sections and comes pre-bushed with a premium Internal PTFE bush, that has an internal diameter of 1.95mm that is perfect for thinner elastics up to an 8 solid or 4/6 Hollow MAX. Section 2 features a carbon wrap 30cm up from the base of the section, this has been purposely designed to side elastic puller. During testing we found this carbon wrap placement to be the optimum positioning for elastic performance. However, if you choose to not use a side puller and prefer a traditional bung, this can also be done via the base of this second section.The Aventus Z900 Match Kit when fully assembled is 2.4 metres in length. Again, during countless hours of testing with different length top kits, the Guru team found this to be the perfect length for most pole fishing situations.Aventus Z900 2.4M Match Kit - Total Weight = 40g

• Perfect for thinner pole elastics
• 2.4m fully assembled
• 3.5mm bore
• Pre-bushed with PTFE bush 
• Reinforced carbon wrap on No2 section for side puller fitting

GRD068 - Aventus Z900 3.5mm 3.9M Match KitThe Aventus Z900 3.9M Match Kit is made up of a 2.4M Aventus Z900 Match Kit and an Aventus Z900 number 3 section. The Z900 2.4M Match Kit has been designed with a 3.5mm tip bore size which suits thinner pole elastics perfectly. The Z900 Match Kit has been developed to cover most natural pole fishing situations, but it’s also a very effective option for commercial silverfish work.The Aventus Z900 3.9M Match Kit is made up of three sections and comes ready to fish – Section 1 is the thinnest section and comes pre-bushed with a premium Internal PTFE bush, that has an internal diameter of 1.95mm that is perfect for thinner elastics up to an 8 solid or 4/6 Hollow MAX. Section 2 features a carbon wrap 30cm up from the base of the section, this has been purposely designed to side elastic puller. During testing we found this carbon wrap placement to be the optimum positioning for elastic performance. However, if you choose to not use a side puller and prefer a traditional bung, this can also be done via the base of this second section.The Aventus Z900 3.9M Match Kit when fully assembled is 3.9M metres in length. 2.4M Z900 Match Kit, plus a 1.5M Aventus Z900 number 3 section. Particularly effective Match Kit package to suit deep pole fishing situations.Aventus Z900 3.9M Match Kit - Total Weight = 85g

• Suits thinner pole elastics perfectly
• Three sections and comes ready to fish
• 3.9m fully assembled
• Particularly effective Match Kit package to suit deep pole fishing situations
• 3.5mm bore
• Pre-bushed with PTFE bush
• Reinforced carbon wrap on No2 section for side puller fitting

GRD069 - Aventus Z900 3.5mm 5.5M Match KitThe Aventus Z900 5.5M Match Kit is made up of a 2.4M Aventus Z900 Match Kit, an Aventus Z900 number 3 and number 4 section. The Z900 2.4M Match Kit has been designed with a 3.5mm tip bore size which suits thinner pole elastics perfectly. The Z900 Match Kit has been developed to cover most natural pole fishing situations, but it’s also a very effective option for commercial silverfish work.The Aventus Z900 5.5M Match Kit is made up of 4 sections and comes ready to fish – Section 1 is the thinnest section and comes pre-bushed with a premium Internal PTFE bush, that has an internal diameter of 1.95mm that is perfect for thinner elastics up to an 8 solid or 4/6 Hollow MAX. Section 2 features a carbon wrap 30cm up from the base of the section, this has been purposely designed to side elastic puller. During testing we found this carbon wrap placement to be the optimum positioning for elastic performance. However, if you choose to not use a side puller and prefer a traditional bung, this can also be done via the base of this second section.The Aventus Z900 5.5M Match Kit when fully assembled is 5.5M metres in length. 2.4M Z900 Match Kit, plus a 1.5M Aventus Z900 number 3 section and a 1.6M Aventus Z900 number 4 sections. Particularly effective Match Kit package to suit deep pole fishing situations.Aventus Z900 5.5M Match Kit - Total Weight = 172g

• Suits thinner pole elastics perfectly
• Four sections and comes ready to fish
• 5.5m fully assembled
• Particularly effective Match Kit package to suit deep pole fishing situations
• Pre-bushed with 3.5mm bore PTFE bush
• Reinforced carbon wrap on No2 section for side puller fitting

GRD147 – Aventus Z900 Section 01 The Aventus ZER0 900 No. 1 section is made from the highest quality Japanese super high modulus carbon for ultimate stiffness, strength, and balance. Section No. 1 has a 3.5mm Internal bore and comes pre-bushed with the highest quality PTFE internal 1.95mm bush, making the section ‘ready to fish’. Please note that all the Aventus Zero 900 sections (including No.1 section) are fully compatible with the Aventus Z700 pole and spare sections. Aventus Z900 Section No. 1 Weight = 15g

• Made from the highest quality Japanese super high modulus carbon
• Ultimate stiffness, strength, and balance
• Fully compatible with the Aventus Z700 pole and spare sections
• Pre bushed with PTFE bush

GRD156 - Aventus Z900 Section 10BThe Aventus ZER0 900 No. 10B section is made from the highest quality Japanese super high modulus carbon for ultimate stiffness, strength, and balance. Aventus Z900 No. 10B section fits into the ninth Aventus Z900 section. Aventus Z900 No. 10B section features section alignment arrows for optimum stiffness and balance. Please note that all the Aventus Zero 900 sections (including No.10B section) are fully compatible with the Aventus Z700 pole and spare sections. Aventus Z900 Section No. 10B Weight = 324g 

• ZERO 900 Tensile Carbon – High modulus carbon for maximum stiffness, strength and balance.
• Ultra Fast Taper – Fast taper mandrels for superior balance, stiffness and weight distribution.
• RJS Rigid Joint System – Super tensile carbon joints for maximum pole rigidity and joint wear resistance.
• Alignment Performance Points – Section alignment points for maximum pole performance.
• Super Glide Smooth Paint Finish – Super smooth matt paint finish for smoother control when shipping pole through the hands.

GRD148 – Aventus Z900 Section 02 The Aventus ZER0 900 No. 2 section is made from the highest quality Japanese super high modulus carbon for ultimate stiffness, strength, and balance. Section 2 features a carbon wrap 30cm up from the base of the section, this has been purposely designed to side elastic puller. During testing we found this carbon wrap placement to be the optimum positioning for elastic performance. However, if you choose to not use a side puller and prefer a traditional bung, this can also be done via the base of this second section. Please note that all the Aventus Zero 900 sections (including No.2 section) are fully compatible with the Aventus Z700 pole and spare sections. Aventus Z900 Section No. 2 Weight = 25g

• Made from the highest quality Japanese super high modulus carbon
• Ultimate stiffness, strength, and balance
• Carbon wrap purposely designed for side elastic puller
• Can be used as side puller or traditional bung
• Fully compatible with the Aventus Z700 pole and spare sections

GRD149 - Aventus Z900 Section 03The Aventus ZER0 900 No. 3 section is made from the highest quality Japanese super high modulus carbon for ultimate stiffness, strength, and balance. Aventus Z900 No. 3 section features section alignment arrows for optimum stiffness and balance. Please note that all the Aventus Zero 900 sections (including No.3 section) are fully compatible with the Aventus Z700 pole and spare sections. Aventus Z900 Section No. 3 Weight = 45g 

• ZERO 900 Tensile Carbon – High modulus carbon for maximum stiffness, strength and balance.
• Ultra Fast Taper – Fast taper mandrels for superior balance, stiffness and weight distribution.
• RJS Rigid Joint System – Super tensile carbon joints for maximum pole rigidity and joint wear resistance.
• Alignment Performance Points – Section alignment points for maximum pole performance.
• Friction Free Matt Tape Finish – Friction free matt tape finish for smoother control when shipping pole through the hands.