Collection: Products

A replacement solid yellow 2mm tip section for Aventus Zero 600 Whip.

GRD085 – Aventus 11.5M True Extension The Aventus 11.5M True Extension is designed to take the Aventus poles to the exact length of 11.5M. This length is commonly applied within World Championships rules and fishing restrictions in specific European countries.Unlike a lot of short butts and extensions that other poles sometimes feature, these are made from the same high-quality carbon as the main pole with some added strength under the elbow areas. This means that the poles superior performance is maintained whereas heavier butts previously lost all the balance and performance, putting the pole under an unbalanced load.The Aventus 11.5M True Extension comes with an EVA bullet nose butt protector ready fitted for ultimate protection at the back end of the section.Aventus 11.5M True Extension – Length 1.275mm Total Weight = 225g

• Takes Aventus poles to the exact length of 11.5M
• Applies to World Championships rules and fishing restrictions
• Made from same high-quality carbon as the main pole
• Comes with an EVA bullet nose butt protector

GRD086 – Aventus 13M True ExtensionThe Aventus 13M True Extension is designed to take the Aventus poles to the exact length of 13M. This length is commonly applied within World Championships rules and fishing restrictions in specific European countries.Unlike a lot of short butts and extensions that other poles sometimes feature, these are made from the same high-quality carbon as the main pole with some added strength under the elbow areas. This means that the poles superior performance is maintained whereas heavier butts previously lost all the balance and performance, putting the pole under an unbalanced load.The Aventus 13M True Extension comes with an EVA bullet nose butt protector ready fitted for ultimate protection at the back end of the section.Aventus 13M True Extension – Length 1.155mm Total Weight = 205g

• Takes Aventus poles to the exact length of 13M
• Applies to World Championships rules and fishing restrictions
• Made from same high-quality carbon as the main pole
• Comes with an EVA bullet nose butt protector

GRD087 – Aventus 16M True ExtensionThe Aventus 16M True Extension is designed to take the Aventus poles to the exact length of 16M. This length is commonly used in modern day fishing, particularly commercial pole fishing. Usually, venues limit pole anglers to a 16M length, it can be vital that you’re fishing at the exact stated 16M, up to islands or as far out into the lakes as possible in open water venues. Most poles on the market state that their poles measure 16M, but in fact it’s a much shorter length. That’s where the 16m True Extension sets the Aventus poles apart.Unlike a lot of short butts and extensions that other poles sometimes feature, these are made from the same high-quality carbon as the main pole with some added strength under the elbow areas. This means that the poles superior performance is maintained whereas heavier butts previously lost all the balance and performance, putting the pole under an unbalanced load.The Aventus 16M True Extension comes with an EVA bullet nose butt protector ready fitted for ultimate protection at the back end of the section.Aventus 16M True Extension – Length 875mm Total Weight = 200g

• Takes Aventus poles to the exact length of 16M
• Helps to comply with modern-day fishery 16M only rules
• Made from same high-quality carbon as the main pole
• Comes with an EVA bullet nose butt protector

GRD169 – Aventus Z700 11.5M Section 07B.The Aventus Z700 11.5M Section has been added to the Aventus Z700 pole range to offer anglers fishing to 11.5M pole limits (typically European anglers) with a stronger and more durable butt section. This butt section features a similar material to the Aventus 10B 16M section, increasing the overall reliability and longevity of the section. 

• Offers stronger and more durable butt section
• Increases the overall reliability and longevity of the section

GRD168 – Aventus Z700 13.0M Section 08B.The Aventus Z700 13.0M Section has been added to the Aventus Z700 pole range to offer anglers fishing to 13M pole limits (typically European anglers) with a stronger and more durable butt section. This butt section features a similar material to the Aventus 10B 16M section, increasing the overall reliability and longevity of the section. 

• Offers stronger and more durable butt section
• Increases the overall reliability and longevity of the section

GRD073 - Aventus Z700 3.5mm 2.4M Match KitThe Aventus Z700 Match Kit has been designed with a 3.5mm tip bore size which suits thinner pole elastics perfectly. The Z700 2.4M Match Kit has been developed to cover most natural pole fishing situations, but it’s also a very effective option for commercial silverfish work.The Aventus Z700 Match Kit is made up of two sections and comes ready to fish – Section 1 is the thinner of the two sections and comes pre-bushed with a premium Internal PTFE bush, that has an internal diameter of 1.95mm that is perfect for thinner pole elastics, up to an 8 solid or 4/6 Hollow MAX. Section 2 features a carbon wrap 30cm up from the base of the section, this has been purposely designed to side elastic puller. During testing we found this carbon wrap placement to be the optimum positioning for elastic performance. However, if you choose to not use a side puller and prefer a traditional bung, this can also be done via the base of this second section.The Aventus Z700 Match Kit when fully assembled is 2.4 metres in length. Again, during countless hours of testing with different length top kits, the Guru team found this to be the perfect length for most pole fishing situations.Aventus Z700 2.4M Match Kit - Total Weight = 40g

• Suits thinner pole elastics perfectly
• Two sections and comes ready to fish
• 2.4m fully assembled
• Perfect length for most pole fishing situations
• Pre-bushed with 3.5mm PTFE bush
• Reinforced carbon wrap ready for side puller fitting

GRD074 - Aventus Z700 3.5mm 3.9M Match KitThe Aventus Z700 3.9M Match Kit is made up of a 2.4M Aventus Z700 Match Kit and an Aventus Z700 number 3 section. The Z700 2.4M Match Kit has been designed with a 3.5mm tip bore size which suits thinner pole elastics perfectly. The Z700 Match Kit has been developed to cover most natural pole fishing situations, but it’s also a very effective option for commercial silverfish work.The Aventus Z700 3.9M Match Kit is made up of three sections and comes ready to fish – Section 1 is the thinnest section and comes pre-bushed with a premium Internal PTFE bush, that has an internal diameter of 1.95mm that is perfect for thinner pole elastics, up to an 8 solid or 4/6 Hollow MAX. Section 2 features a carbon wrap 30cm up from the base of the section, this has been purposely designed to side elastic puller. During testing we found this carbon wrap placement to be the optimum positioning for elastic performance. However, if you choose to not use a side puller and prefer a traditional bung, this can also be done via the base of this second section.The Aventus Z700 3.9M Match Kit when fully assembled is 3.9M metres in length. 2.4M Z700 Match Kit, plus a 1.5M Aventus Z700 number 3 section. Particularly effective Match Kit package to suit deep pole fishing situations.Aventus Z700 3.9M Match Kit - Total Weight = 87g

• Suits thinner pole elastics perfectly
• Three sections and comes ready to fish
• 3.9m fully assembled
• Particularly effective Match Kit package to suit deep pole fishing situations
• Pre-bushed with 3.5mm PTFE bush

GRD075 - Aventus Z700 3.5mm 5.5M Match KitThe Aventus Z700 5.5M Match Kit is made up of a 2.4M Aventus Z700 Match Kit, an Aventus Z700 number 3 and number 4 section. The Z700 2.4M Match Kit has been designed with a 3.5mm tip bore size which suits thinner pole elastics perfectly. The Z700 Match Kit has been developed to cover most natural pole fishing situations, but it’s also a very effective option for commercial silverfish work.The Aventus Z700 5.5M Match Kit is made up of 4 sections and comes ready to fish – Section 1 is the thinnest section and comes pre-bushed with a premium Internal PTFE bush, that has an internal diameter of 1.95mm that is perfect for thinner pole elastics, up to an 8 solid or 4/6 Hollow MAX. Section 2 features a carbon wrap 30cm up from the base of the section, this has been purposely designed to side elastic puller. During testing we found this carbon wrap placement to be the optimum positioning for elastic performance. However, if you choose to not use a side puller and prefer a traditional bung, this can also be done via the base of this second section.The Aventus Z700 5.5M Match Kit when fully assembled is 5.5M metres in length. 2.4M Z700 Match Kit, plus a 1.5M Aventus Z700 number 3 section and a 1.6M Aventus Z700 number 4 sections. Particularly effective Match Kit package to suit deep pole fishing situations.Aventus Z700 5.5M Match Kit - Total Weight = 187g

• Suits thinner pole elastics perfectly
• 5.5m fully assembled
• Particularly effective Match Kit package to suit deep pole fishing situations
• Pre-bushed with 3.5mm PTFE bush

The number 1 section for the Aventus Zero 700 pole fits onto the number 2 section to create a top kit. The number 1 section has a tip bore diameter of 3.5mm and comes pre fitted with an internal PTFE bush.This section is made from Zero 700 Tensile Carbon, this is a high modulus carbon for excellent stiffness, strength and balance. 

• Pre-bushed with 3.5mm PTFE bush

The 16-meter number 10 section for the Aventus Zero 700 pole, fits in between the number 8 and 10 sections. This is a parallel section and could be used to take the pole to longer lengths. This section is made from Zero 700 Tensile Carbon which is a high modulus carbon for excellent stiffness, strength, and balance. It also features the Rigid Joint System; this uses super tensile carbon joints for maximum pole rigidity and joint wear resistance. A friction free matt tape finishes the section off for smoother control when shipping the pole through the hands.The Aventus white iridescent paint has been used throughout the Zero 900 and Zero 700 to significantly reduce the heat absorbed throughout the section, particularly important in warmer countries. Section alignment arrows are incorporated to maintain the poles most effective performance, along with one foot marker intervals for enhanced accuracy.

• ZERO 700 Tensile Carbon – High modulus carbon for maximum stiffness, strength and balance.
• Ultra Fast Taper – Fast taper mandrels for superior balance, stiffness and weight distribution.
• RJS Rigid Joint System – Super tensile carbon joints for maximum pole rigidity and joint wear resistance.
• Alignment Performance Points – Section alignment points for maximum pole performance.
• Super Glide Smooth Paint Finish – Super smooth matt paint finish for smoother control when shipping pole through the hands.

The number 2 section for the Aventus Zero 700 pole fits together with the number 1 section to create a top kit. The number 2 section has a strengthened section in the optimum position to fit a puller bush if required.This section is made from Zero 700 Tensile Carbon, this is a high modulus carbon for excellent stiffness, strength and balance. 

• Reinforced with carbon wrap ready for side puller fitting

The number 03 section for the Aventus Zero 700 pole fits in between the number 2 and 4 sections. This is the section that the top kits fit on to.This section is made from Zero 700 Tensile Carbon which is a high modulus carbon for excellent stiffness, strength, and balance. It also features the Rigid Joint System; this uses super tensile carbon joints for maximum pole rigidity and joint wear resistance. A friction free matt tape finishes the section off for smoother control when shipping the pole through the hands.Performance points are marked on the section to align the spine of the pole for maximum performance.

• ZERO 700 Tensile Carbon – High modulus carbon for maximum stiffness, strength and balance.
• Ultra Fast Taper – Fast taper mandrels for superior balance, stiffness and weight distribution.
• RJS Rigid Joint System – Super tensile carbon joints for maximum pole rigidity and joint wear resistance.
• Alignment Performance Points – Section alignment points for maximum pole performance.
• Friction Free Matt Tape Finish – Friction free matt tape finish for smoother control when shipping pole through the hands.

The number 04 section for the Aventus Zero 700 pole fits in between the number 3 and 5 sections. This section is made from Zero 700 Tensile Carbon which is a high modulus carbon for excellent stiffness, strength, and balance. It also features the Rigid Joint System; this uses super tensile carbon joints for maximum pole rigidity and joint wear resistance. A friction free matt tape finishes the section off for smoother control when shipping the pole through the hands.Performance points are marked on the section to align the spine of the pole for maximum performance.

• ZERO 700 Tensile Carbon – High modulus carbon for maximum stiffness, strength and balance.
• Ultra Fast Taper – Fast taper mandrels for superior balance, stiffness and weight distribution.
• RJS Rigid Joint System – Super tensile carbon joints for maximum pole rigidity and joint wear resistance.
• Alignment Performance Points – Section alignment points for maximum pole performance.
• Friction Free Matt Tape Finish – Friction free matt tape finish for smoother control when shipping pole through the hands.

The number 05 section for the Aventus Zero 700 pole fits in between the number 4 and 6 sections. This section is made from Zero 700 Tensile Carbon which is a high modulus carbon for excellent stiffness, strength, and balance. It also features the Rigid Joint System; this uses super tensile carbon joints for maximum pole rigidity and joint wear resistance. A friction free matt tape finishes the section off for smoother control when shipping the pole through the hands.Performance points are marked on the section to align the spine of the pole for maximum performance.

• ZERO 700 Tensile Carbon – High modulus carbon for maximum stiffness, strength and balance.
• Ultra Fast Taper – Fast taper mandrels for superior balance, stiffness and weight distribution.
• RJS Rigid Joint System – Super tensile carbon joints for maximum pole rigidity and joint wear resistance.
• Alignment Performance Points – Section alignment points for maximum pole performance.
• Friction Free Matt Tape Finish – Friction free matt tape finish for smoother control when shipping pole through the hands.

The number 06 section for the Aventus Zero 700 pole fits in between the number 5 and 7 sections. This section is made from Zero 700 Tensile Carbon which is a high modulus carbon for excellent stiffness, strength, and balance. It also features the Rigid Joint System; this uses super tensile carbon joints for maximum pole rigidity and joint wear resistance. A friction free matt tape finishes the section off for smoother control when shipping the pole through the hands.Performance points are marked on the section to align the spine of the pole for maximum performance.

• ZERO 700 Tensile Carbon – High modulus carbon for maximum stiffness, strength and balance.
• Ultra Fast Taper – Fast taper mandrels for superior balance, stiffness and weight distribution.
• RJS Rigid Joint System – Super tensile carbon joints for maximum pole rigidity and joint wear resistance.
• Alignment Performance Points – Section alignment points for maximum pole performance.
• Friction Free Matt Tape Finish – Friction free matt tape finish for smoother control when shipping pole through the hands.