Collection: Products

GRD146 - Aventus F1 Cupping Kit The Aventus F1 Cupping Kit comes as a two-piece cupping kit, measuring at 1.7M and comes supplied in the exact same length (when Cup is applied – roughly 70mm) as the other 1.8M Aventus F1 and Aventus Sky F1 top kits. Meaning there is no need to cut down any part of the section, just simply apply your cup connector and you’ll have the exact same length Cupping Kit to your actual F1 fishing kits. This significantly improves feeding accuracy and overall performance.Cupping Kits come under some serious strain and stress, that’s why we have used the same carbon material as our Aventus Power Kits, to reduce the chances of potential breakages.The Aventus Cupping Kit has a bore size of 4.8mm, the perfect diameter to be used in conjunction with our Rapid Release Pole Cups (not included). Simply glue in the connector part of the Rapid Release Pole Cup and you’re good to go. (We recommend using a reliable product to glue in the connector, such as Araldite, or Gorilla Epoxy Glue).Sections only - Rapid Release Pole Cup available separately.Aventus Cupping Kit – total Weight = 27g

• Two-piece Cupping Kit
• Same length (when cup is applied) as the other 1.8m Aventus F1 kits
• No need to cut down any part of the section - simply apply cup connector
• Significantly improves feeding accuracy
• Increased strength due thicker carbon construction
• Perfect diameter for Guru Rapid Release Pole Cups (sold separately)

The Aventus F1 cupping kit Section 1 fits onto the F1 cupping kit number 2 section to create the full cupping kit. This is the same length as the Aventus F1 kit and F1 Sky kits to provide pinpoint accuracy. This section is designed to take the Guru Rapid Release Pots without the need for cutting back or modifying the section.

• Rapid Release Pole Cups fit straight on
• Stiff, strong and reinforced for cupping in

The Aventus F1 cupping kit Section 2 fits onto the F1 cupping kit number 1 section to create the full cupping kit. This is the same length as the Aventus F1 kit and F1 Sky kits to provide pinpoint accuracy. 

• Stiff, strong and reinforced for cupping in

GRD078 – Aventus F1 Kit 4.7mmThe Aventus F1 Kit is our purpose designed F1 top kit option. Shorter in length than the other models in the Aventus range makes this perfectly suited to this style of fishing. Shorter kits have several benefits for F1/commercial fishing. Thanks to the shorter length fish pop up much closer to the net which improves overall landing and fishing efficiency.Featuring a 4.7mm tip bore size makes this the perfect top kit for thin to medium pole fishing elastics. The Aventus F1 Kit is made up of two sections and comes ready to fish – Section 1 is the thinnest section and comes pre-bushed with a premium Internal PTFE bush, that has an internal diameter of 2.75mm, perfect for thin to medium pole elastics, up to a size 16 MAX. Section 2 features a carbon wrap 30cm up from the base of the section, this has been purposely designed to side elastic puller. During testing we found this carbon wrap placement to be the optimum positioning for elastic performance. However, if you choose to not use a side puller and prefer a traditional bung, this can also be done via the base of this second section.Most F1 style kits come as a single piece of carbon, ours however come in two pieces which makes the actual kit much stiffer than a single piece of carbon, due to the second section of the F1 kit being a higher grade of modulus carbon, thus making the Aventus Sky F1 Kit much stiffer than other models available. During testing we also found that having a two-piece F1 kit significantly improved elastic performance.The Aventus F1 Kit comes in a natural black carbon finish; however, we do have a Sky F1 Kit option which has been specifically developed to suit shallow fishing on commercials.Aventus F1 Kit – Total Weight = 30g

• Purpose designed F1 top kit option
• Shorter in length than the other models
• 2 piece carbon producing stiffer performance
• Sky colour version also available as a shallow water option
• Pre-bushed with 4.7mm PTFE bush

The Aventus F1 Section 1 fits onto the F1 number 2 section to create a top kit. The number 1 section has a tip bore diameter of 4.7mm and comes pre fitted with an internal PTFE bush.

• Pre-bushed with 4.7mm PTFE bush

The number 2 section for the Aventus F1 Section fits together with the number 1 section to create a top kit. The number 2 section has a strengthened section in the optimum position to fit a puller bush if required. This section is shorter that a standard number 2 section and has been designed to optimise speed and performance when catching F1s and small carp

• Reinforced carbon wrap for side puller fitting 

GRD079 – Aventus Sky F1 KitThe Aventus F1 Kit is our purpose designed shallow F1 top kit option. Shorter in length than the other models in the Aventus range makes this perfectly suited to this style of fishing. Shorter kits have several benefits for F1/commercial fishing. Thanks to the shorter length fish pop up much closer to the net which improves overall landing and fishing efficiency.The Sky colour has been purposely designed for shallow F1 fishing. The special grey sky paint camouflages into the sky resulting in better presentation and improved performance when fishing shallow, or in shallow water up to islands or edges.Featuring a 4.7mm tip bore size makes this the perfect top kit for thin to medium pole fishing elastics. The Aventus Sky F1 Kit is made up of two sections and comes ready to fish – Section 1 is the thinnest section and comes pre-bushed with a premium Internal PTFE bush, that has an internal diameter of 2.75mm, perfect for thin to medium pole elastics, up to a size 16 MAX. Section 2 features a carbon wrap 30cm up from the base of the section, this has been purposely designed to side elastic puller. During testing we found this carbon wrap placement to be the optimum positioning for elastic performance. However, if you choose to not use a side puller and prefer a traditional bung, this can also be done via the base of this second section.Most F1 style kits come as a single piece of carbon, ours however come in two pieces which makes the actual kit much stiffer than a single piece of carbon, due to the second section of the F1 kit being a higher grade of modulus carbon, thus making the Aventus Sky F1 Kit much stiffer than other models available. During testing we also found that having a two-piece F1 kit significantly improved elastic performance.Aventus Sky F1 Kit – Total Weight = 31g

• Purpose designed shallow F1 top kit option
• Shorter in length than the other models in the Aventus range
• Sky colour has been purposely designed for shallow F1 fishing
• Camouflages into the sky resulting in better presentation and improved performance
• Two piece carbon producing stiffer perfomance
• Pre-bushed with 4.7mm PTFE bush

The Aventus F1 Section 1 fits onto the F1 number 2 section to create a top kit. The number 1 section has a tip bore diameter of 4.7mm and comes pre fitted with an internal PTFE bush.This section is a discreet light grey colour to avoid spooking fish in shallow or clear water.

• Pre-bushed with 4.7mm PTFE bush
• Sky grey colour to disguise pole when fishing shallow 

The number 2 section for the Aventus F1 Sky Section fits together with the number 1 section to create a top kit. The number 2 section has a strengthened section in the optimum position to fit a puller bush if required. This section is shorter that a standard number 2 section and has been designed to optimise speed and performance when catching F1s and small carp.

• Reinforced carbon wrap for side puller fitting in the optimum position

Compatible with the 10ft &11ft Aventus feeder rods. The 2oz Guru Fibreglass Quivertip is heaviest tip available to these specific Feeder rods. This is designed to be used when you’re fishing with heavier feeders, targeting bigger fish and really need some power to land fish quickly.  

• Heaviest tip in the Aventus Feeder range
• Used with heavy feeders and long distances
• Fits Aventus 10’ and 11’ Feeder rods
• Fibreglass tip
• Flouro green tip

Compatible with the 10ft &11ft Aventus feeder rods. The 1oz Guru Fibreglass Quivertip is the lightest tip in the Aventus Feeder range and is designed to be used with lighter feeders and shorter distances. The 1oz Fibreglass Quivertip will fit into the top section of the Aventus 10’ and 11’ Feeder rods. The perfect replacement tip to fit the above two rods. Tip Material – Fibreglass 

• Lightest tip in the Aventus Feeder range
• Used with lighter feeders and shorter distances
• Fits Aventus 10’ and 11’ Feeder rods
• Fibreglass tip
• Red and white tip

Compatible with the 10ft &11ft Aventus feeder rods. The 1.5oz Guru Fibreglass Quivertip is the true all-round tip choice and covers all your spring/summer feeder fishing needs when using the 10’ and 11’ Aventus Feeder rods. The 1.5oz Fibreglass Quivertip will fit into the top section of the Aventus 10’ and 11’ Feeder rods. The perfect replacement tip to fit the above two rods. 

• The all-round tip in the Aventus Feeder range
• Used with all feeder sizes
• Fits Aventus 10’ and 11’ Feeder rods
• Fibreglass tip
• Yellow and white tip

GRD076 – Aventus Match Power Kit 4.7MThe Aventus Match Power Kit is a true all-round top kit that is extremely versatile, aimed to cover most pole fishing situations, on both commercial and natural venues. Featuring a 4.7mm tip bore size, suiting thin to medium pole elastics perfectly.The Aventus Match Power Kit is made up of two sections and comes ready to fish – Section 1 is the thinner of the two sections and comes pre-bushed with a premium Internal PTFE bush, that has an internal diameter of 2.75mm that is perfect for both solid and hollow pole elastics, up to a size 16 MAX. Section 2 features a carbon wrap 30cm up from the base of the section, this has been purposely designed to side elastic puller. During testing we found this carbon wrap placement to be the optimum positioning for elastic performance. However, if you choose to not use a side puller and prefer a traditional bung, this can also be done via the base of this second section.The Aventus Match Power Kit when fully assembled is 2.4 metres in length. Again, during countless hours of testing with different length top kits, the Guru team found this to be the perfect length for most pole fishing situations.Aventus Match Power Kit - Total Weight = 40g

• True all-round top kit
• Extremely versatile
• Will cover most pole fishing situations
• 2.4m fully assembled
• 4.7mm bore
• Pre-pushed with PTFE bush

The Aventus Match Power Section 1 fits onto the Match Power number 2 section to create a top kit. The number 1 section has a tip bore diameter of 4.7mm and comes pre fitted with an internal PTFE bush.

• 4.7mm Bore 
• Pre-bushed with PTFE bush
• Fits onto No2 section to complete top kit

The number 2 section for the Aventus Match Power Section fits together with the number 01 section to create a top kit. The number 2 section has a strengthened section in the optimum position to fit a puller bush if required. 

• Second section of top kit
• Reinforced carbon wrap for side puller fitting

GRD082 – Aventus Mini 4-5 Safe SectionThe Aventus Mini 4-5 Safe Section is a very handy addition to the Aventus poles, aimed to protect the more valuable and fragile Aventus 4 and 5 sections from potential damage and breakage.The 4-5 Safe Section is particularly beneficial when you’re fishing right on the end of the section, preventing your elbow from crushing the more fragile female end of the pole.The 4-5 Safe Section can be fitted in either the 4, or the 5 section. Simply flip the Extension around to the required section and you’re good to go.Aventus Mini 4-5 Safe Section - Length = 0.58mm Total Weight = 78g

• Designed to protect Aventus 4 and 5 sections
• Beneficial when fishing on the end of the section
• Can be fitted in either the 4, or the 5 section